Table of Contents


~ W

Phần 414-02: Máy phát điện và bộ điều chỉnh 2000 Quy trình tháo và lắp đặt hướng dẫn sử dụng Taurus/Sable Workshop Ngày sửa đổi: 10/07/2002 Dụng cụ đặc biệt Công cụ cố định bánh đà 303-544 (T96P-6375-A) 2000 Taurus/Sable Workshop Manual trang 1 trang 3

2009-04-17 001036 Máy phát điện

2000 Taurus/Sable Workshop Manual

SECTION 414-02: Generator and Regulator REMOVAL AND INSTALLATION
Generator -- 3.0L (4V)

Special Tool(s)

Flywheel Holding Tool 303-544 (T96P-6375-A)

Removal and Installation 1. Disconnect the battery. For additional information, refer to Section 414-01. 2. Rotate the accessory drive belt tensioner clockwise and position the accessory drive belt aside. 3. Remove the power steering hose bracket nut from the generator mounting bolt.

Page 1 of 3
2000 Taurus/Sable Workshop Manual Procedure revision date: 10/07/2002

4. NOTE: The left side bolt will come out with the generator. Remove the upper generator bolts.

5. Remove the RH front wheel and tire assembly. For additional information, refer to Section 204-04. 6. Remove the RH front fender splash shield.
1. Remove the 4 pin-type retainers. 2. Remove the 3 fender screws. 3. Remove the lower screw.
7. Remove the screws and the generator splash shield.

8. Remove the torque converter inspection cover.

2000 Taurus/Sable Workshop Manual

Page 2 of 3

9. Install the flywheel holding tool.
10. NOTE: The crankshaft pulley bolt has a reverse thread. NOTE: The crankshaft pulley and bolt are a molded composite and are one piece. Remove the bolt and the crankshaft pulley.
11. Lower the generator to allow access to the electrical connectors. 1. Disconnect the crankshaft sensor. 2. Release the oxygen sensor connector locator from the bracket. 3. Remove the lower generator bolt.
12. Disconnect the regulator electrical connector.
13. Remove the generator from the vehicle. 1. Remove the B+ connector nut. 2. Disconnect the B+ connector and remove the generator.
14. To install, reverse the removal procedure.

2000 Taurus/Sable Workshop Manual

Page 3 of 3


doPDF Phiên bản 6.2 Bản dựng 294 (Windows Vista x32)

Related Posts